How do you remove a Moen kitchen faucet spout

Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32″ hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.

How do you remove a kitchen faucet spout?

1. Turn the cap on the top of the faucet spout housing counterclockwise with a pair of slip joint pliers. …
2. Grasp the retaining ring with the slip joint pliers, and turn the ring counterclockwise to remove it from the spout.
3. Grab the spout body with your fingers, and pull it straight off the faucet diverter housing.

How do I find my Moen faucet model number?

Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).

How do you remove a Moen aerator without a tool?

Alternatively you could also use your finger nails. You will find small multiple ridges which protrude out and around the aerator (Delta, Moen and other manufacturers have the ridges), try and catch your finger nails onto the ridges and twist the aerator out in an anticlockwise motion.

How do you remove a faucet aerator without removing it?

1. Fill a plastic bag about halfway with vinegar. …
2. Wrap the vinegar-filled bag around the shower head or faucet so that any place where water exits is completely submerged in the vinegar.
3. Hold the bag in place by snapping a rubber band around it, affixing it to the shower head or faucet.

How do I identify my Moen kitchen faucet cartridge?

Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).

Do all faucet aerators come off?

Most faucet aerators have been threaded on by hand, and often you can unscrew it the same way. Make sure to dry off both the faucet and your hands first in order to get a good grip.

How do you tell which Moen valve I have?

If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your Moen valve cartridge is to remove the old one. You will do this by first shutting off the hot and cold water feed to your shower.

Where is the part number on a Moen faucet?

The model/series number is usually a four or five digit number and can be followed by letters. On the underside of the spout, the series number may be found. There is a decorative ring at the bottom of the spout that has a series number on it.

Where do I find my kitchen faucet model number?

The most common place to find the model number is on the label of the box you purchased the faucet in. (We suggest you write this number on your warranty card for later use if you disguard the box).

Article first time published on

How do you remove a recessed aerator without a key?

Remove a Cache Aerator Without a Key If a tool becomes necessary, try using a knife from your kitchen drawer. A flat-head screwdriver will also probably work if you wedge the tip into one of the notches and push.

What is an aerator wrench?

Use this Cache Aerator Wrench to remove certain bathroom sink faucet aerators. This specialty tool allows the weekend DIYer to remove and replace aerators clogged with hard water deposits.