Stainless Steel Tumbler (I used a 20oz)Spray Paint.Painters Tape.Mod Podge.Silicone Brushes.Fine Glitter.Clear Coat Spray.Epoxy (Both A and B parts)
What supplies do you need to make a glitter tumbler?
- Stainless Steel Tumbler (I used a 20oz)
- Spray Paint.
- Painters Tape.
- Mod Podge.
- Silicone Brushes.
- Fine Glitter.
- Clear Coat Spray.
- Epoxy (Both A and B parts)
Can you epoxy over vinyl decals on tumblers?
Most vinyl manufacturers actually recommend that you don’t apply a sealer over the vinyl. The exception to this would be if you want to go through the process of sealing your tumbler with epoxy. This is usually done with glitter tumblers. … Now you have the knowledge to apply vinyl on tumblers and other curved surfaces.
Does permanent vinyl stick to glitter?
Metal Surfaces also work great for Adhesive Vinyl. … We used the Glitter FX in Red which has a permanent Adhesive.What epoxy do I use for tumblers?
1. ENVIROTEX LITE EPOXY RESIN For Tumblers. Envirotex Lite is a brand of epoxy resin you can use for tumblers, whose claim to fame is that it is a pour-on, high gloss finish. It cures to a thick, glossy coating in about 8 hours at 70F, and reaches full cure in about 48 hours.
How do you get vinyl to stay on a cup?
Clean the surface of your mug with 91% isopropyl alcohol. This will remove any oil or dirt and get the surface as clean as possible. This will make sure the vinyl decal sticks and stays stuck permanently. If your coffee mug surface is straight, you’re good to continue on.
What do I need to epoxy a tumbler?
- Cup turner.
- Disposable Gloves.
- Popsicle Sticks.
- Epoxy.
- Medicine Cups.
- Glitter.
- Tumbler.
- Mod Podge (Hard Coat or Dishwasher Safe)
Do you have to put epoxy over vinyl decals?
Sealing a wooden tray You can go ahead and paint it or spray paint it but just be sure to give it a really long time to dry before applying the vinyl. … With a tray like this with vinyl on it, I would definitely recommend doing an epoxy resin.Can I put glitter on top of vinyl?
If you try it, you’ll find out that it works. BUT, should you? Most manufacturer application instructions suggest that you should not layer glitter heat transfer vinyl on top of glitter heat transfer vinyl. … So, Siser recommends you not layer glitter on top of glitter.
Can you Mod Podge over Cricut vinyl?We have used Mod Podge (not ‘Modge Podge’ as I know lots of us call it) successfully for a lot of our projects, including sealing over vinyl, making custom photo canvases, and glittering pretty things. Mod Podge is also non-toxic and generally safe to use with older kids.
Article first time published onDo you have to seal vinyl on cups?
If you use the permanent vinyl and let it cure, you should not need a sealant. However, if you really want to add a sealant, the one that lasts the longest and is FDA approved is epoxy.
How many coats of epoxy do you put on a tumbler?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
How long do you let epoxy dry on Tumblr?
Apply A Coat Of Resin: Turn the rotisserie motor on and, with the tumbler turning, slowly pour the ArtResin onto the surface of the tumbler as it turns, smoothing it out with your gloved hands. Once the entire surface has been evenly covered, allow it to turn until it is dry to the touch, within 18-24 hours.
Why is my glitter tumbler bumpy?
This problem can be caused by anything floating/falling into your resin while it cures, resulting in imperfections in the surface. If you are experiencing imperfections that look more like domed bumps in the resin, skip down to #4.
Can I use Mod Podge instead of epoxy?
You can use Mod Podge like epoxy resins to seal art work, paint, wood, glass, and various other surfaces without any major issues provided the surfaces are kept indoors or out of wind and rain. … If you are just looking for a sealing agent though, Mod Podge can hold its own with epoxy in most situations.
What can I use instead of epoxy?
Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.
Is it safe to drink out of epoxy Cup?
ArtResin has been deemed safe for food contact once it has cured, but please keep food or beverages well away from ArtResin in its pre-cured liquid form. ArtResin is NOT edible or potable in either liquid or cured form. The maximum temperature cured ArtResin can come in contact with is 120F or 50C.
Can you put epoxy on acrylic tumblers?
It is possible to put epoxy over plastic as long as it is not #5PP. Epoxy will not stick to this specific type of plastic. … Plastic was not made to be smothered by a chemical, but it can be done. If you’re looking for a cheaper alternative try using acrylic tumblers.
What kind of vinyl do you use for Yeti cups?
Permanent vinyl is the best kind of vinyl to use for tumbler cups. Cricut Permanent vinyl will last really well. You can put this vinyl through the dishwasher but stainless steel tumblers hold up better if you hand-wash them.
